FastAsBuilt
(323) 403-0390 Order Online
San Francisco Bay Area · Alameda County

As-Built Plans in Union City, CA

Fast, field-verified measured drawings for homes and commercial spaces across Union City. Permit-ready PDF and editable CAD, typically delivered in 48–72 hours.

Get a Union City quote Order online
48–72h typical turnaround
1/8" measured accuracy
PDF + DWG deliverables

Turnaround times are estimates and may vary based on project complexity and scheduling.

Suburban single-family home representative of Union City, California
As-built plans in Union City

Measured drawings built on real Union City conditions

For Union City homeowners, contractors, and designers, dependable as-built plans turn an existing building into a document you can actually build from. Union City grew from the historic Alvarado and Decoto districts into a suburban hub of postwar tract housing.

Guesswork on existing conditions is where budgets blow up, so we field-verify every dimension before it reaches a drawing. The Bay Area is defined by Victorian and Edwardian homes, Craftsman and Eichler neighborhoods, and modern tech-era infill. Aging structures and seismic considerations make reliable as-built plans indispensable for remodels, additions, and unit conversions.

FastAsBuilt combines on-site laser measurement with senior CAD drafting to document existing conditions across Union City and the rest of Alameda County. You get clean, dimensioned floor plans, elevations, and sections you can hand straight to your architect, designer, contractor, or the City of Union City Building Division.

Union City at a glance

  • Region: San Francisco Bay Area
  • County: Alameda County
  • Permitting: City of Union City Building Division
  • 5+ neighborhoods served
  • Turnaround: 48–72 hours typical Turnaround times are estimates and may vary based on project complexity and scheduling.
Get a fixed quote
Why Union City owners order plans

Projects that start with accurate as-builts

Across Union City, the most common reasons property owners come to us are simple: they need drawings that reflect what is really there.

ADUs & garage conversions

Accessory dwelling units are booming in Union City. Precise as-builts of the existing structure are the first thing plan check wants to see.

Additions & remodels

Adding square footage or reworking a floor plan in Union City starts with drawings that match the current building exactly.

Permit submittals

Additions, ADUs, and tenant improvements in Union City all require accurate as-built drawings for the building department.

Buying & selling

Realtors and owners in Union City use measured floor plans and verified square footage to market and close with confidence.

Insurance & records

Accurate documentation of your Union City property protects you for insurance, appraisals, and future planning.

As-built floor plan drawing and CAD software
Permitting in Union City

Drawings the City of Union City Building Division will accept

Bay Area jurisdictions combine some of the highest property values in the nation with strict, design-review-heavy permitting. Cities routinely require detailed as-built drawings for additions to older housing stock, and accurate documentation is critical where lots are small and every square foot is contested.

In Union City, plans for additions, accessory dwelling units, and tenant improvements are submitted to the City of Union City Building Division. Reviewers compare your proposed work against documented existing conditions, so an accurate as-built set is what keeps a project from stalling in plan check.

Our Union City drawings are prepared with California requirements in mind, including Title 24 energy documentation, current ADU regulations, and seismic considerations common to Alameda County. That groundwork means fewer correction cycles and a faster path to approval.

Most Union City building departments will not begin a meaningful review without existing-condition drawings, because they establish the baseline for setbacks, egress, occupancy, and how much of a structure is being altered. California ADU law has made garage and accessory-unit conversions especially popular, and each of those projects hinges on documenting exactly what is there before new work is proposed. Starting with a verified as-built set is the single most reliable way to avoid a stalled permit in Union City.

Coverage

Neighborhoods we serve in Union City

Local crews and fast scheduling across Union City and the surrounding Alameda County area.

DecotoAlvaradoOld AlvaradoAlvarado NilesCabello

Don’t see your neighborhood? We almost certainly still cover it — just ask.

Local architecture

The buildings we measure in Union City

Union City’s housing stock is defined less by ornate historic fabric and more by its suburban buildout. Across Decoto, Alvarado, Old Alvarado, Alvarado Niles, and Cabello, many homes trace back to the city’s growth from the historic Alvarado and Decoto districts into a postwar community of tract houses, straightforward footprints, and later remodels. That suburban character sounds simple on paper, but in practice it often means additions layered onto original plans, garage conversions, and room layouts that no longer match old records.

For that kind of housing, accurate field verification matters. FastAsBuilt sends local Bay Area crews to measure on site with laser equipment, then our senior drafters turn those measurements into permit-ready CAD files in PDF and DWG format. In a region where aging homes, seismic considerations, and decades of incremental changes are common, reliable existing-condition drawings help you start with what is really there, not what an outdated plan suggests.

Common projects

Why Union City owners need as-built plans

In Union City, owners usually come to us when a typical suburban house is about to change in a meaningful way. ADU conversions are common, especially where a garage or other existing space is being reworked. We also see homeowners preparing for home additions and second-story additions on tract homes that were not originally designed for today’s space needs.

Those projects depend on knowing the exact existing footprint, wall locations, openings, and usable square footage before design and permit work begin. That is especially true in established areas like Decoto and Old Alvarado, where a house may have gone through multiple updates over time.

  • ADU conversion planning from measured existing conditions
  • Single-story expansions tied into postwar floor plans
  • Second-story addition documentation for remodel teams and permit sets

FastAsBuilt provides 2D as-built plans starting at $900 and 3D as-built plans starting at $1,500, with typical residential turnaround in 48 to 72 hours, so you can move from site measurement to design decisions quickly.

Permitting

Working with the City of Union City Building Division

When you submit for an addition, conversion, or major remodel in Union City, your plans will typically be reviewed through the City of Union City Building Division. In the Bay Area, permitting is detail-oriented, and existing-condition information often carries real weight because older homes and altered tract properties do not always match prior records. On smaller suburban lots, every dimension can affect how a proposal is drawn and evaluated.

Verified as-built drawings help your architect, designer, or contractor submit with fewer assumptions. FastAsBuilt documents the home as it exists today using on-site laser measurement, then our senior drafters produce permit-ready CAD files. That gives you a dependable base plan for the City of Union City Building Division review process and helps reduce friction caused by missing or inaccurate existing-condition documentation.

What we deliver

Everything in your Union City as-built set

Every Union City project is field-measured and drafted to professional standards, then delivered in formats your whole team can use. We capture the building as it actually stands today — not as the original plans intended — so decades of past remodels, additions, and quiet modifications are all reflected in the final drawings.

  • Fully dimensioned, scaled floor plans of existing conditions
  • Exterior elevations and building sections where needed
  • Wall thicknesses, door and window sizes, and fixture locations
  • Reflected ceiling and roof plans on applicable projects
  • Print-ready PDF and editable CAD (DWG) files
  • Clean, standard layering your drafter can build on
Technician capturing existing conditions with a laser measuring device
Local expertise

We know Union City buildings

Measuring in Union City means working with the building stock that actually exists here, not a generic template. The Bay Area is defined by Victorian and Edwardian homes, Craftsman and Eichler neighborhoods, and modern tech-era infill. Aging structures and seismic considerations make reliable as-built plans indispensable for remodels, additions, and unit conversions.

That same local grounding carries into how we prepare your submittal package. Projects in Union City route through the City of Union City Building Division, and our drawing sets are organized the way its plan checkers expect — dimensioned existing-condition plans, consistent layering, and clear notation of anything that affects setbacks, egress, or occupancy. Bay Area jurisdictions combine some of the highest property values in the nation with strict, design-review-heavy permitting. Cities routinely require detailed as-built drawings for additions to older housing stock, and accurate documentation is critical where lots are small and every square foot is contested.

How it works

Your Union City as-built, in four steps

1

Request a quote

Tell us the address and property details anywhere in Union City. We send a fixed quote fast.

2

We measure on-site

Our technicians capture the space with laser measurement tools across Union City.

3

We draft your plans

Existing conditions become precise, dimensioned drawings.

4

Receive & build

Get permit-ready PDF and DWG files, with revisions included.

Pricing

As-built plan pricing in Union City

Square-footage-based pricing, no hourly billing. 2D plans start at $900 and 3D plans start at $1,500 for Union City properties up to 1,500 sq ft — see your exact price and order online.

2D As-Built Plans

Field-measured, dimensioned 2D floor plans for any property.

$900starting price
48–72-hour delivery

Turnaround times are estimates and may vary based on project complexity and scheduling.

  • Starts at $900 (up to 1,500 sq ft)
  • Then $0.50 per sq ft above 1,500
  • Measured, dimensioned floor plans
  • Doors, windows & fixtures
  • PDF + DWG files
  • 1 revision included
Order 2D plans
Most Popular

3D As-Built Plans

A full 3D model plus measured 2D drawings of your property.

$1,500starting price
3–5 business days

Turnaround times are estimates and may vary based on project complexity and scheduling.

  • Starts at $1,500 (up to 1,500 sq ft)
  • Then $1.00 per sq ft above 1,500
  • 3D model + 2D floor plans
  • Elevations & sections
  • PDF + DWG + 3D model files
  • 2 revisions included
Order 3D plans

Custom Projects

For projects that need more than a standard as-built.

Reach out to us for a custom quote.
  • Additions & remodels
  • New construction
  • ADUs & garage conversions
  • SB9 lot splits & duplexes
  • Tenant improvements & commercial
  • Whatever your project needs — just ask
Reach out to us
Why Union City chooses FastAsBuilt

Precision that keeps your project on schedule

Re-measurements and correction cycles cost real money. We get the existing conditions right the first time so your Union City project keeps moving.

  • Fixed, transparent pricing with no hourly surprises
  • Laser-accurate field measurements
  • Editable DWG plus print-ready PDF deliverables
  • Drawings formatted for Alameda County plan check
  • Revisions included on every order
  • Licensed, insured, California-based teams

Fast turnaround

Most Union City residential projects delivered in 48–72 hours.

Turnaround times are estimates and may vary based on project complexity and scheduling.

Verified accuracy

Every drawing double-checked against site data before delivery.

Trusted by pros

Contractors, architects, realtors, and property managers rely on us.

Reviews

What Union City area clients say

Real feedback from property owners and pros we've measured for across San Francisco Bay Area.

★★★★★
“Our Victorian had decades of quirky modifications. The field techs caught details other services missed, and the drawings reflected the house as it actually is.”
Grace F.
Oakland, CA · Victorian renovation
★★★★★
“SF plan check is unforgiving. These as-builts were dimensioned, layered, and formatted the way DBI expects, and our expediter had zero notes. That never happens.”
Tom D.
San Francisco, CA · Condo remodel
★★★★★
“We had no plans for our 1960s ranch house. FastAsBuilt measured it on a Tuesday and we had permit-ready PDFs and CAD by Friday. Our ADU project started on schedule because of it.”
Steven K.
San Jose, CA · ADU project
Nearby

Other cities we serve near Union City

AlamedaAlbanyAntiochAthertonBelmontBerkeley

Browse all California cities we serve →

Learn more

Guides to as-built plans

Helpful reading before you start your Union City project.

Read more on the blog →

FAQ

As-built plans in Union City: common questions

How much do as-built plans cost in Union City?

Pricing in Union City is based on square footage, not billed hourly. 2D as-built plans start at $900 and 3D as-built plans start at $1,500 for properties up to 1,500 sq ft, with a per-square-foot rate above that. You see your exact price instantly and can order online in minutes.

How fast can I get as-built drawings in Union City?

For a typical Union City home, you can expect permit-ready drawings within 48–72 hours of measurement. Turnaround times are estimates and may vary based on project complexity and scheduling.

Are your Union City as-built plans permit-ready?

Yes. Our drawings are formatted for submittal to the City of Union City Building Division and follow California conventions, so they are ready for plan check for additions, ADUs, and tenant improvements.

Do you provide editable CAD files for Union City projects?

Every order includes editable DWG files alongside print-ready PDFs, so your architect, designer, or contractor in Alameda County can build directly on our drawings.

What kinds of Union City properties do you measure?

We document single-family homes, condos, multifamily buildings, and commercial spaces across Union City, including ADU conversions, home additions, second-story additions.

Do you serve neighborhoods throughout Union City?

We cover all of Union City, including Decoto, Alvarado, Old Alvarado, Alvarado Niles, plus nearby Alameda County communities. If you are just outside the city, we very likely still serve you — just ask.

Need as-built plans in Union City?

Local crews, fast scheduling, and fixed pricing across Alameda County. Get your quote today.

Get your free quote